Editing TechOPS (section)

===Deployed Systems===

The physical gear is located in Kansas City in a co location facility by the name of *Joes Data Center* ( http://www.joesdatacenter.com). 

The deployed gear is as follows:

* 2 Dell Optiplex 745 (active/passive pfsense routers)
* 2 Cisco 2950 Switch (main/peering switch), slated for HA configuration
* 2 Dell Optiplex 745 (active/passive FreeNAS servers)
* 1 Dell Poweredge 2800 (vm server)
* 2 USB flash drives  (root drives)
* 3 USB hard drives (raid and backup data storage)
* DRAC card
* IPMI
* 2 Cyclades PDU (power)

====Dell Optiplex 745 (pfsense router)====
'''Specs:'''
Dual Core P4 3.0Ghz / 1 gig

'''Notes:'''
System can also be accessed via SSH. Not much can be done via SSH unless you know exactly what you are doing.

====Cisco 2950 Switch (main/peering switch)====

'''Notes:'''
Please don't do anything on the switch without a full and complete understanding of what you are doing. Under 99.99999% of circumstances, no switch work should need to be done by anyone except Charles.

'''Specs:'''

  cisco WS-C2950-24 (RC32300) processor (revision M0) with 20710K bytes of memory.
  Processor board ID FOC0748Y5FT
  Last reset from system-reset
  Running Standard Image
  24 FastEthernet/IEEE 802.3 interface(s)
  
  32K bytes of flash-simulated non-volatile configuration memory.
  Base ethernet MAC Address: 00:0E:83:92:CA:C0
  Motherboard assembly number: 73-5781-12
  Power supply part number: 34-0965-01
  Motherboard serial number: FOC07471LRM
  Power supply serial number: DAB0747GJH9
  Model revision number: M0
  Motherboard revision number: B0
  Model number: WS-C2950-24
  System serial number: FOC0748Y5FT
  Configuration register is 0xF


=====Dell Poweredge 2800 (vm server)=====

'''Access details:''' 

'''Notes:'''
You can find virtual machine details (name/ip/vlan) in racktable ( http://racktable.freenetworkfoundation.org/index.php?page=object&object_id=1 ).

'''Specs:'''
<pre>
OS:

root@knel-prod-fm1:/data# cat /etc/debian_version 
6.0.3
root@knel-prod-fm1:/data#

root@knel-prod-fm1:/data# uname -a
Linux knel-prod-fm1 2.6.32-5-amd64 #1 SMP Fri Sep 9 20:23:16 UTC 2011 x86_64 GNU/Linux
root@knel-prod-fm1:/data# 

Hardware:
CPU: 2 3.6Ghz dual core Xeon processors (64 bit)
RAM: 6 gigabytes 

See attached dmidecode file for verbose hardware details
</pre>

====PDU====

'''Access details:'''

'''Notes:'''
Not hooked to console access yet. All devices are powered through it.

'''Specs:'''
TBA

====DRAC CARD====


'''Notes:'''
Accessed via HTTPS and SSH. Provides reboot functionality and console access. So one can console in (via the web UI or SSH). This will put you at the vm server console.
You can use minicom on the vm server to jump to the switch,pfsense,pdu console. You can also reboot the system via the web UI or SSH. 

'''Specs:'''
N/A

====IPMI====

'''Notes:'''
Not online yet. 

'''Specs:'''
N/A